2021.09.20 09:56 striggleclench Has anyone lived 3-4 floors above a cafe? Typical cake and sandwiches type. How was it?
Looking at apartments found one super nice one 4 floors above a cafe. When I went to look there were zero signs of roaches or mice. Don't know if I should go for it.
submitted by striggleclench to japanlife [link] [comments]
2021.09.20 09:56 andraz2012 Master's Degree Or Career
I am 23 year old guy with a bachelor's degree in computer science. The master's degree is free in my country, so it doesn't cost me anything to get it (besides busting my ass for two years).
BUT, I just got a job (more like a summer internship) in a unicorn company. That comes with all the benefits you'd expect. The best equipment, free lunches, masaages, amazing team buildings, great mentourship and so on. I am thoroughy enjoying myself and they're very impressed by my work ethic and my experience. My boss asked me to actually get emplyed there because I'm doing so well. I declined, saying that I'll pursue my masters degree. They said that I could work as much or little as I wanted during my masters, but it would not count as being employed, but continue only this internship status.
The problem here is that they're "fine" with with me working 20 hours per week, but I believe they are not thrilled. I will also not get any stock options in this time, and I am quite sure that the company will IPO within the next year to year and a half, which completely eliminates that.
The thing is that I don't think I want to get my master's. I feel like I should get it, but I am not too thrilled. The thing is also that this is a unique opportunity because this is not silicon valley, it's a small country in eastern Europe and companies like this one don't just pop up every year.
I don't know how to figure out what to do. I don't know what extra benefits will masters degree bring me or really how to quantify it. I know a few people that went back to school after a few years of working to get their masters just because they couldn't advance into positions without it. But I also know that I will get a sizable chunk of cash which I will invest and grow over time if I actually get emplyed here. I want to get into product management within at most 10 years.
submitted by andraz2012 to csMajors [link] [comments]
2021.09.20 09:56 primeukbot Anker Nano USB C Charger, Anker 18W PIQ 3.0 Fast Charger Adapter with 3ft USB-C to USB-C Cable - £9.99 Prime /+£4.49 NonPrime @ Anker/Amazon
2021.09.20 09:56 Right_Leopard8446 What makes a guy exciting when you first start dating?
So I think I have come to the realization I may be too boring and it is affecting who wants to see me again. So I am wondering what makes a guy an exciting prospect when you first start seeing him? How can I evoke those feelings of excitement as a guy?
submitted by Right_Leopard8446 to dating [link] [comments]
2021.09.20 09:56 vladocar Best Nautical Fonts (Sailor Sea Fonts) ⚓🚢🧭
2021.09.20 09:56 99101004 210920 Chanyeol Instagram Story Updates: “Have a great chuseok🐶🤍”
|submitted by 99101004 to exo [link] [comments]|
2021.09.20 09:56 TechieNikhil Total amount withdraw form NiceHash this Month :-)
Thank you NiceHash :-)
submitted by TechieNikhil to NiceHash [link] [comments]
2021.09.20 09:56 Difficult-Quality647 Thought du jour: how do you get them back in their launch bays ?
After all, we always see Thunderbird One launch from the bay under the retractable pool, after being escalatered down from some other bay, and Thunderbird Three launches from that closing tubular bay under the Ring on Tracy Island...
But how do they get them back inside after a mission? I can at least see a method of getting Thunderbird Two back into it's bay, but One and Three ?
( I know, asking engineering questions on a 55+ year old series in the wee hours of the morning,,,,,😎)
submitted by Difficult-Quality647 to Thunderbirds [link] [comments]
2021.09.20 09:56 jaap_null Don Johnson is on cameo
2021.09.20 09:56 Boo_Randy Fed officials to sell stocks to avoid apparent conflict of interest (or maybe they knew their Ponzi markets were on the verge of imploding)
Sept 9 (Reuters) - Two Federal Reserve officials said on Thursday they would sell their individual stock holdings by the end of the month to address the appearance of conflicts of interest.
submitted by Boo_Randy to Wallstreetsilver [link] [comments]
2021.09.20 09:56 Formal_Beginning_682 Would you rather: have BTD battles 2 for one whole day but you cant record OR Know its release date THIS IS A TRICK QUESTION SO THINK WISELY
submitted by Formal_Beginning_682 to battles2 [link] [comments]
2021.09.20 09:56 svanapps r/CryptoCurrency - “We are in a war against Bitcoin,” says Turkey’s president — of course he is at ‘war’ when the Lira has become pretty much worthless
|submitted by svanapps to CryptoToFuture [link] [comments]|
2021.09.20 09:56 dorisfrench Milehighcity.com & Milehicity.com 50k
2021.09.20 09:56 maimairabbit Cotton candy couple (art/commission by me @maimoonrabbit)
|submitted by maimairabbit to furry [link] [comments]|
2021.09.20 09:56 kushalshah94 My First tier list was apparently a mess, so here is my second one.( increase right to left)
2021.09.20 09:56 remlutupse Goldbelly Coupon Code
2021.09.20 09:56 dapsneakers Jordan 4 White Cements *on hand pics*
2021.09.20 09:56 CapnCrunch53 Trouble untethering 13.5 OGSE with Sliver 6.1 (hangs at Apple logo on reboot)
I have a 16GB iPhone SE A1662 with iOS 13.5. I've had it semi-tethered using checkra1n for awhile, but now I'm trying to untether it.
I'm using checkra1n 0.10.2 and Sliver 6.1, on a MacBook Pro with High Sierra 10.13.6. I've got the dependencies installed, and working through all the steps for untethered in Sliver seems to go well. I run checkra1n, reach the home screen, reinstall Cydia Substrate (I've tried a few different versions now), click "Make it fully untethered", and that seems to work and it prompts me to put in the pin-locked SIM.
I believe I'm doing the SIM part correctly. I took a spare SIM, pin-locked it on another iPhone, insert it into the phone I'm working on, and it recognizes it as a locked SIM. I click cancel, it says "Locked SIM" in the top left, but at this point when I shut the phone off and turn it back on, it hangs on the Apple logo.
Should I try a different iOS version? I know it says that untethering 12, 13, and 14 are supported with Sliver 6.1, but all the videos I've seen are for 12.x or 14.x. Not opposed to upgrading to 14 as long as it doesn't put me in a worse situation.
submitted by CapnCrunch53 to setupapp [link] [comments]
2021.09.20 09:56 Parking-Mousse7609 Amazing Form
2021.09.20 09:56 CFDMoFo Is my PSU failing?
I've got an Anycubic Mega X with an E3D Hemera, 0.6mm nozzle, 5015 blower fan for part cooling, BLTouch, TMC2208, custom Marlin 2.x (Knutwurst fork) and upgraded mainboard cooling fan. This setup worked wonderfully for several months with no recent hardware changes.
On to the issue: a week ago, the hot end started having trouble reaching the designated temperature with the cooling fan blowing at 100%, which it never did in all the months before with the same setup. Repeated PID tunings did not mitigate the issue, and the values were way off from the ones performed before. Now I had to reduce the speed to 40% during printing so that it could keep the temperature. Yesterday, the extruder also suddenly stopped moving for a few seconds per layer during a Benchy print, and two minutes into the print the heated bed temperature started crashing down as well. The thermal runaway protection triggered and halted the print.
In the Knutwurst FW Facebook group, I was told to check the wiring for burn marks or loose connections and that maybe the PSU is failing. I checked the wires for secure fit and burn marks but everything was fine, which would leave the PSU as possible culprit. It's a Meanwell LRS-350-12. Are there any other possible error sources? If it is the PSU, would it make sense to swap it for a more powerful one? Meanwell apparently is a good supplier for PSUs, so I might look for a drop-in replacement from them.
submitted by CFDMoFo to FixMyPrint [link] [comments]
2021.09.20 09:56 my_name_seotami Cannabis Sativa Geschichte und Herkunft der ältesten Nutzpflanze
|submitted by my_name_seotami to cbdherbs [link] [comments]|
2021.09.20 09:56 meerc-cat01 Pls help. Going for vacation.
Hey, ant keepers. I have a serious issue coming up. In December I'm going away for 5 weeks, thus all my ants will stay without any care. I live in Australia and have 50+ worker Iridomyrmex bicknelli colony, single Rhytidoponera metallica queen and a single Myrmecia nigrocincta queen. As there are 3 more month to go I expect Rhytidoponera queen to have 20+ workers by December. So I have two question:
2021.09.20 09:56 Impressive_Toe_8900 Do you agree with the russian party Yabloko that russian anexation of crimea is like german annexation of sudetanland?
2021.09.20 09:56 gandhikahn I found this, It haunts me.
2021.09.20 09:56 Driftyboyy0 Whoever Semlyer is thank you very much. I appreciate you adding us to that raid!!!